The short version
Read the brand and model off the dial. Find the reference number (caseback, between the lugs or on the papers) and search it in quotes. If there is no brand or reference, the movement calibre and the case design will narrow it down, and a watchmaker can confirm it. If you would rather skip all of that, identify it from a photo in about a minute.
People come to this with very different watches in their hands. Some have a gold dress watch from a grandparent with a name they half recognise. Some have a heavy diver bought on holiday that may or may not be what the seller said. Some have a stopped watch from a house clearance with a dial so faded they cannot read it. The method is the same for all of them: start with the easiest clue, and only dig deeper when it runs out.
- 1Dial. Brand, model line, movement type and the country of origin.
- 2Rehaut. The inner ring under the crystal. Some brands engrave the serial here.
- 3Between the lugs. Remove the strap: reference at 12, serial at 6 on many older pieces.
- 4Caseback. Reference, serial, material, water resistance, sometimes a model name.
- 5Clasp. Logo, bracelet reference and a date or factory code on some brands.
- 6Movement. Behind the caseback: maker, calibre number and jewel count.
Step 1: Read the dial
The dial is designed to be read, and on most watches it tells you more than you would expect. Use your phone camera zoomed in, or a loupe if you have one, and write down every word, including the tiny print at the very bottom. Dial text tends to sit in the same zones from brand to brand.
- 1Under 12. Brand name or logo, and often the model or family name just below it.
- 2Above 6. Model, "Automatic", chronometer wording, depth rating, sometimes jewel count.
- 3On the edge at 6. The country line: "Swiss Made", "Swiss", "Japan", "Japan Movt" and similar.
- 4Complications. Date, day, GMT or chronograph scales. Their layout is model-specific.
The brand and model line
Under 12 o’clock you will usually find the brand, as a printed name, an applied metal logo or both. Just beneath it, many brands print the family name (Seamaster, Navitimer, Aquaracer) or a line such as “Oyster Perpetual”. These names alone narrow a brand’s catalogue down to one range.
The text above 6 o’clock
This is where watches describe themselves: “Automatic”, “Chronometer”, “Officially Certified”, “Kinetic”, “Solar”, a depth rating like “300m / 1000ft”, sometimes a jewel count on older pieces (“17 Jewels”, “25 Jewels”). Each of these rules whole families in or out. A watch that says “Quartz” is not the mechanical version that looks identical from across the room.
The country line
Right at the edge, at 6 o’clock, sits a short line stating where the watch was made. It reads as small print and is easy to miss under the bracelet. It is also one of the most informative things on the dial:
- “Swiss Made” means the movement is Swiss, the watch was cased in Switzerland, and since 2017 at least 60% of the manufacturing cost is Swiss.
- “Swiss Movt” or “Swiss Movement” means only the movement is Swiss. The case and dial were made elsewhere, typically in a lower price bracket.
- “Japan”, “Japan Movt” or “Made in Japan” are common on Seiko, Citizen and Orient, and on watches using their movements.
- Letters either side, such as “T Swiss Made T” or “Swiss T < 25”, refer to tritium lume. That places the dial before the late 1990s, when brands moved to Super-LumiNova.
Step 2: Find the reference and serial number
Two numbers matter, and people mix them up constantly. The reference number identifies the model and its exact configuration: case material, dial, bezel, bracelet. Every watch of that version has the same reference. The serial number is unique to your watch. It dates the watch on many brands, and it is the number stolen-watch records are keyed on.
- 1Reference number. The model and configuration. Same on every watch of that version.
- 2Serial number. Unique to this watch. Dates it, and is what stolen-watch records are keyed on.
- 3Between the lugs. Where some brands hide the reference (at 12) and serial (at 6). Strap off to see it.
Where to look
- The caseback. The most common spot. Look for “Ref.”, “Réf.”, “Mod.” or a number in a format like 0000.00, alongside a longer serial.
- Between the lugs. Take the strap or bracelet off. Older Rolex models carry the reference at 12 o’clock and the serial at 6 o’clock here, with a plain caseback.
- The rehaut. The inner ring between the dial and the crystal. Since the late 2000s Rolex engraves the serial at 6 o’clock on it.
- Inside the caseback. Vintage Omega, Longines and many others stamped the case reference inside. Only open a caseback if you know how, or let a watchmaker do it.
- The papers and box. Warranty cards, certificates and the label on the outer box usually state the reference, and often the serial.
Once you have a reference, search it in quotation marks along with the brand name. A reference such as “210.30.42.20.03.001” returns one specific Omega Seamaster Diver 300M, not a family of them. If it does not return the watch you are holding, double-check the digits, and then be suspicious.
Our serial number guide covers brand-specific locations in more detail, and the Rolex serial numbers by year table dates most Rolex watches from their serial alone.
Step 3: Identify the movement
When the outside runs out of clues, the inside often has them. Most movements are stamped with a maker and a calibre number, and calibre numbers are well documented: collectors have catalogued them for decades. The movement tells you who made the engine and roughly when, even if the dial says nothing.
- 1Calibre stamp. Maker and calibre number, jewel count, sometimes "Swiss" or "Unadjusted".
- 2Balance wheel. The beating heart. Its size and bridge shape help match a calibre.
- 3Jewels. Synthetic rubies at the pivots. Count them against the stamped number.
- 4Rotor. On automatics. Often signed or decorated by the brand, even on a bought-in movement.
Seeing it is the hard part. Some watches have a display caseback with a sapphire window, and you can read the movement straight through it. Otherwise the caseback has to come off. Screw-down casebacks need a proper case wrench, and a slip on a valuable watch leaves scratches that cost real money. A local watchmaker will usually open it and tell you the calibre for a small fee, or free if they are doing a battery change anyway.
What a calibre can and can’t tell you
A lot of brands buy movements rather than make them. The ETA 2824-2, its clone the Sellita SW200, the Valjoux 7750 chronograph, the Miyota 8215 and the Seiko NH35 power thousands of models from hundreds of brands. So a 2824 tells you “Swiss automatic, mid-range, probably from the last few decades”, not which watch you have. An in-house calibre, on the other hand, is specific: if the rotor is signed and the calibre only appears in one brand’s catalogue, you are most of the way there.
Count the jewels too. The visible jewels should broadly match the number stamped on the movement or printed on the dial. A “25 jewels” dial over a movement with seven visible jewels is a mismatch worth asking about.
Step 4: Read the case, lugs, crown and bezel
Case design changes slowly and deliberately, so it is a reliable fingerprint once you know what to look for. Start with the overall shape, then measure the case across, without the crown, in millimetres. A 36 mm and a 40 mm version of the same model are different references.
Round
Cushion
Tonneau
Rectangular
Octagonal bezel
Square
- Lugs. Straight, curved, twisted (“lyre”), hooded or integrated into the bracelet. Integrated bracelets with an angular bezel belong to a small, well-known group of 1970s-inspired sports watches.
- Crown. Position (3 o’clock, 4 o’clock, left side for “destro” models), size, any logo on it, and whether the case has guards protecting it.
- Bezel. A 60-minute diving scale, a 24-hour GMT scale, a tachymeter for chronographs, a slide-rule on pilot’s watches, or a fixed fluted or smooth ring. The bezel insert material (aluminium, ceramic, sapphire) dates it, too.
- Pushers. Chronograph pushers that are round, pump-style or screw-down, and how many sub-dials the chronograph has.
- Bracelet. Three-link, five-link, “beads of rice”, mesh or integrated. Many brands use a bracelet style on one family only, and the clasp is often signed with its own reference.
Step 5: Check hallmarks and material stamps
Precious-metal cases are usually stamped with their fineness, often inside the caseback or on a lug. These stamps tell you what the case is made of, which matters for both identification and value:
| Stamp | Means |
|---|---|
| 750 | 18 carat gold (75% gold) |
| 585 | 14 carat gold |
| 375 | 9 carat gold, common on British watches |
| 950 / PT950 | Platinum |
| 925 | Sterling silver |
| GF, RGP, “Gold filled” | Gold layer over base metal, not solid gold |
| “Base metal”, “Stainless steel back” | Plated case with a steel caseback |
A fineness number on its own is easy to fake. Properly hallmarked gold also carries an assay office mark next to it, and Swiss gold cases often show a small St Bernard dog’s head. If a watch is sold as solid gold and you can only find “gold plated” or “GP” on it, that ends the conversation.
Step 6: Reverse image search and enthusiast forums
With a few clues written down, the internet does the rest. Crop a photo to just the watch face, straight on, and run it through Google Lens or another image search. Ignore the shopping carousel of watches that only look similar. You are looking for a listing, a review or a forum post that shows the same dial layout, hands, markers and bezel, and ideally states a reference you can then search on its own.
Marketplaces such as Chrono24 are useful for comparison: search the brand and family, then filter by case size and dial colour until the listings match yours. If you are still stuck, enthusiast forums and watch communities are remarkably good at this. Post clear photos of the dial, caseback, side and movement if you have it, plus the case size and anything you have already worked out. Collectors who have handled hundreds of a model can often name a reference, and spot a replaced dial, in minutes.
1Is there a brand on the dial?
Yes. read the model line and the country line.
No. go to the caseback and movement.
2Is there a reference on the caseback or between the lugs?
Yes. search the reference. It usually names the exact model.
No. note the serial and any case or movement numbers.
3Can you see the movement?
Yes. the calibre tells you the maker and era.
No. a watchmaker can open it in minutes.
4Still unsure?
Yes. Compare case shape, hands and bezel with listings, or scan a photo.
No. Ask an enthusiast forum with clear photos of every side.
When it is unmarked or vintage
Some watches give you almost nothing: a blank dial, a plain case, a caseback worn smooth. Others are old enough that their brand no longer exists or made watches under several names. Change the order of attack:
- Movement first. On an unbranded watch, the movement is often the only signed part. Many mid-century watches used movements from a handful of Swiss makers whose calibres are well catalogued.
- Hallmarks second. Assay marks on gold and silver cases include a date letter in some countries, which can date the case to a single year.
- Design third. Lume type, hand shapes, case proportions and crystal (acrylic or sapphire) place a watch in a decade even when nothing else does.
- People last, but do ask. A watchmaker who services vintage pieces will often recognise a movement and case maker at a glance.
Be wary of vintage watches whose parts do not agree with each other. A 1960s case with a 1990s dial, or hands that are clearly newer than everything else, is common after decades of servicing. It does not always mean anything sinister, but it does change the value, and on expensive references it is exactly what counterfeiters and “franken” builders exploit.
The fast way: let AI identify it from a photo
Everything above works, and it is worth knowing. It is also slow if you just want a name. Our AI watch identifier reads the same clues from a straight-on dial photo, plus a caseback or side shot if you add them, and returns the brand, model, reference and era in about a minute. The identification is free. If you want to go further, the full report adds an authenticity verdict, component scores, red flags and an estimated market value.
It has the same blind spots as a human working from photos: it cannot see the movement unless the caseback is transparent, and it is less sure of unbranded or heavily modified watches. It tells you when it is unsure, which is the point at which the manual steps above earn their keep.
Identify your watch from a photo
Brand, model and reference from one dial photo, free. Full authenticity report optional.
When you will need this
- Inheriting a watch. You need the exact model before you insure it, value it or decide whether to service it.
- Buying second-hand. Check that the watch matches the listing, then check the serial against stolen-watch records. A genuine watch can still be stolen.
- Selling or insuring. Buyers search by reference and insurers schedule watches by it. “Gold Omega” is not enough.
- Reporting a loss. If a watch is lost or stolen, the reference and serial are what let dealers and police match it. Write them down now, while you still have it.
The honest bottom line
Most watches can be identified at home with a phone camera and twenty minutes. Identifying a watch is not the same as authenticating it, though. If the watch is valuable, or you are about to pay real money for it, have a certified watchmaker or the brand look at it in person before you rely on any identification, ours included.
Berichte dienen nur zur Information. Bei hochwertigen Käufen empfehlen wir, den Bericht mit einer persönlichen Prüfung durch einen zertifizierten Uhrmacher zu ergänzen.
Ein KI-Scan ist eine Vorprüfung anhand der Fotos, keine Garantie und kein Gutachten. Nicht sichtbare Teile können nicht geprüft werden.
Frequently asked questions
How do I identify a watch by its markings?
Read the dial first (brand, model line, and the country line at 6 o’clock), then the caseback for a reference and serial number, then the inside of the lugs and the clasp. The reference number is the most useful single marking: search it in quotes and it usually names the exact model.
How do I identify a watch with no brand name?
Go inside. The movement is often signed or carries a calibre number even when the dial is blank, and that tells you who made the movement and roughly when. Combine it with the case shape, any hallmarks and the style of the hands, then ask a watchmaker or an enthusiast forum with clear photos of every side.
Where is the reference number on a watch?
It depends on the brand. Many engrave it on the caseback; some, including older Rolex, engrave it between the lugs at 12 o’clock where the bracelet hides it; vintage Omega often has it inside the caseback. The warranty card and box label usually repeat it.
Can I identify a watch from the movement?
You can identify the movement, which narrows the maker and era. Many brands use the same bought-in movements, so an ETA or Sellita calibre alone does not name the watch. A movement made in-house by the brand, or a signed rotor, is much more specific.
What does “Swiss Made” or “Japan” on the dial tell me?
Where the watch, or at least its movement, was made. “Swiss Made” means the movement is Swiss, it was cased in Switzerland and at least 60% of the manufacturing cost is Swiss. “Swiss Movt” or “Japan Movt” means only the movement came from there. Tiny letters either side, such as “T Swiss Made T”, point to tritium lume and a watch from before the late 1990s.
How do I use reverse image search to identify a watch?
Crop the photo to just the watch face, ideally straight on, and run it through Google Lens or a similar tool. Ignore the shopping results that only roughly match and look for listings or forum posts showing the same dial layout, hands and bezel. Then confirm the model by searching its reference number.
How can I tell how old my watch is?
The serial number is the best clue for brands that publish or are known to follow serial ranges, such as Rolex and Omega. Movement calibre, lume type, dial wording and hallmarks give you a range for the rest. A service record or the original papers settle it.
Is there a fast way to identify a watch from a photo?
Yes. Our AI watch identifier names the brand, model and reference from a dial photo in about a minute, free, and can go on to check authenticity and estimate value. It is a good first step even if you plan to confirm the result by hand.
Serial number lookups by brand
Brand-specific guides to where the serial and reference numbers are, and what they tell you.
- Rolex
- Tudor
- TAG Heuer
- Oris
- Hublot
- Richard Mille
- Girard-Perregaux
- Maurice Lacroix
- Raymond Weil
- Concord
- Zodiac
- Benrus
- Wittnauer
- Victorinox
- Fossil
- Michael Kors
- Shinola
- Pulsar
- Buren
- Philip Stein